How long a suite turnover “should” take is the wrong first question. The more useful one is what you can actually document and measure — especially in Ontario, where the law does not hand landlords a template the way it does in British Columbia.
Key takeaways
It is easy to assume every province regulates the move-out/move-in handoff the same way. Ontario does not: the Residential Tenancies Act does not impose a mandatory joint condition-inspection-report process on landlords the way British Columbia’s does. In BC, “the landlord and tenant together must inspect the condition of the rental unit”, and the landlord must offer at least two opportunities for it, produce a signed written report, and give the tenant a copy — both at move-in and again at move-out. The consequences are not cosmetic: a tenant who skips both offered inspections loses the right to have a deposit returned, and a landlord who fails to offer two opportunities or provide the signed report loses the right to claim against it for damage. Nothing in Ontario ties deposit or damage-claim rights to a documented inspection this directly, which is exactly why building a documentation habit voluntarily matters more in Ontario, not less.
Without a statutory template to follow, the discipline has to be self-imposed: timestamped photos or video of every room at move-out, matched against the same at move-in where it exists, appliance serial numbers and condition noted, and a written acknowledgment from the departing tenant where one can reasonably be obtained. This is not paperwork for its own sake — it is the only evidence base a landlord has if a damage dispute ever reaches the Landlord and Tenant Board, since the LTB is an adjudicative tribunal that decides on the evidence each party actually puts in front of it and the process is adjudicative rather than a rubber stamp.
There is no published Canadian standard for how many days a turnover “should” take — unit size, the scope of make-ready work and local trade availability all move the number too much for a single figure to be honest. What is measurable, and worth tracking, is a portfolio’s own turnover rate over time. CMHC’s annual Rental Market Survey counts a unit as “turned over” if it was occupied by a new tenant who moved in during the past 12 months, and its 2025 results show the rate moving in a consistent direction across major markets: turnover runs meaningfully higher in the most expensive rent quartile than the most affordable one in every city it reports on — Edmonton at 33.6% in the top quartile against 22.5% in the bottom, Vancouver at 16.3% against 11.1%, Toronto at 12.1% against 7.9%. CMHC attributes the pattern to greater tenant mobility at the top of the market and much lower mobility in affordable units. That gap matters operationally: a portfolio weighted toward higher-rent units should expect and budget for a faster unit-turn cadence than one weighted toward affordable stock, independent of anything the property management team does differently.
Rather than chasing an external benchmark that does not exist, track a portfolio’s own move-out-to-move-in gap by unit type and by cause (routine end-of-lease vs. an N11 mutual agreement to end the tenancy vs. an abandonment covered separately in this hub), and separate the cleaning/make-ready window from the marketing/vacancy window. A building that is fast at make-ready but slow to re-let has a leasing problem being mislabelled as a turnover problem, and the fix for each is different.
How the tenancy ends changes what the “clock” even measures. A routine end-of-lease move-out is planned weeks in advance and the make-ready work can often start the same day the keys come back. An N11 mutual agreement to end the tenancy is frequently negotiated on shorter notice, compressing the planning window a manager normally relies on to line up cleaners and trades. Blending both into one “average turnover days” figure buries a real difference in how much lead time the team actually had — worth splitting out if the portfolio is large enough to see the pattern.
Seasonality is the other variable worth isolating before drawing conclusions from a change in the number. Move activity is not evenly distributed across the year in most Canadian rental markets, and a building that looks slower in a heavy-volume month may simply be running the same process against more simultaneous turns, not a process that has actually degraded. Comparing month-over-month without controlling for volume is one of the more common ways a portfolio talks itself into a fix that was never needed.
Worked example — the same 21 days, two different diagnoses (illustrative)
Two similar 40-unit buildings each report a 21-day average turnover. Building A: move-out inspection and documentation on day 1, cleaning and paint touch-up complete by day 6, unit re-let and new tenant moved in by day 8 — the remaining 13 days sat vacant while the leasing team waited on a scheduled showing window.
Building B: move-out documentation on day 1, but cleaning does not start until day 9 because a single shared maintenance contractor is booked across the whole portfolio, paint and repairs finish day 17, and the unit is re-let within 4 days of being show-ready.
Both buildings report the identical 21-day figure. Building A has a leasing-velocity problem; Building B has a make-ready capacity problem. A single blended metric hides the difference — splitting make-ready days from vacant-marketing days is what actually points at the fix.
Related reading: what happens when the unit does not end up empty through a normal move-out, applying the same split-the-clock discipline to repair work orders and holding the cleaning and paint contractor to a measured make-ready time.
No. Unlike British Columbia, Ontario’s Residential Tenancies Act does not mandate a joint condition-inspection-report process — documentation is a landlord’s own practice, not a statutory requirement.
The landlord’s right to claim against the security or pet damage deposit for damage is extinguished if they fail to offer two inspection opportunities or provide the signed report — a real consequence, not a formality.
No published Canadian source sets one. Unit size, scope of work and local trade availability move the number too much for a single figure to be meaningful across buildings.
It shows turnover running consistently higher in expensive-quartile units than affordable ones in every major market it tracks, which means a portfolio’s expected turnover cadence should track its rent mix, not a single portfolio-wide assumption.
A 30-minute call is enough to tell you whether AI pays for itself here.